• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

door handle lock repair (lyng-otto.thoughtlanes.net) handles are an essential part of the decor of your home. A new handle can bring your home's decor and interior modern.

Over time your knobs for your doors can begin to feel stiff and even break. These are signs that it's time to replace the knobs. This guide will help you select the correct door handle replacement for your home.

upvc door handle repair Knobs

Door handles can enhance the appearance of your home while also making it easier for people to open and close doors. They come in a variety of finishes, colors and styles to complement your decor. If yours is beginning to show signs of wear or just need an upgrade replacing them is simple and can be done in a few steps.

The first thing to find is the shaft or spindle through which the knob is attached to the door. Some knobs have a tiny hole that you can put a narrow screwdriver into to loosen the set screws holding the handle in place. Some have a tiny slot or hole that you can press the spring-activated detent pin using a flathead. When you press the pin and the latch mechanism opens, it releases and lets you pull or push the knob.

Once you have the spindle or shaft in your hands, remove the old knob and replace it. Make sure it is aligned correctly and ensure that the latch is working properly before tightening the new set screws.

After replacing the knob, you can place the rod for the latch into the door's hole. Interlock it with the rod system on the second knob. Make sure that the holes are aligned, then tighten the screws on the latch plate.

Some people prefer an brushed or smooth metal finish for their door hardware, giving their home a modern and sleek style. This will match their furniture. Some prefer a rustic design that works well with farmhouse-style rooms. If you have a member of your family who has mobility issues, you may want to choose the lever or rim lock that require less pressure to operate.

Other factors are being looked at more and more when it comes to the design of door handles. Accessibility and control of infections are two major issues that have led to the development of innovative new handle designs, such as ones that can be operated using the forearms of a person.

Latch

The latch that holds the door handle repairs handle open can wear down as time passes. It is easy to change the latch on your door handle. This will make an enormous difference in the way it opens and closes.

Depending on the kind of knob you have, the latch may be part of the knob itself, or it might be an independent piece attached to the door itself. In either situation, the same procedure for removing and installing will apply. It's easy to remove the old latch, especially if you have doors with a "magic" button. This little pressure-slot, located on the side knob, is what you need to press in order to pop the latch out of the handle.

If your handle isn't equipped with this magical button, the first step is to take off any cover plates that are positioned over the latch plate. They are typically circular or rectangular and can be removed with the aid of a screwdriver. Some have a slot in which you can insert your screwdriver. Other handles just snap off.

Then, unscrew the machine screws that attach the inner plate and latch to the door handle. These are the screws with a sharp tip - you will be required to keep them in a safe location to use them again in the next steps. Once the screws are removed, you are able to remove the latch plate and the mechanism from the hole, and then set it aside.

Then you can begin to install the new latch. Install the latch plate into the door hole and secure it using the hardware provided. Make sure that the square pin on the inside of the latch is pointing towards the latching mechanism inside the handle and that it lines up with the other screw chambers in the door handle. Then, push the outside latch plate onto the handle and secure it using the screws provided.

Strike Plate

It is not uncommon to replace a door handle because it feels loose, or isn't locking properly. This is usually caused by misaligned parts in the latching mechanism, such as the strike plate being too short or has moved up or downward on the doorjamb with time. This simple project will allow you to replace your old strike plate with a new, larger one that can provide greater security and keep your door closed.

Apply a lipstick or another marking material on the bolt for the latch to check if it is the strike plate. Close the door and try to latch it. If the mark is below the strike plate hole it means that the plate is too small and the upvc door handle repair near me won't latch. If the mark is higher or below the strikeplate hole, the strikeplate may have been moved upwards or downwards on the doorjamb.

You might be able to install the new strikeplate in place over the one you have already installed using the screws that come with it, depending on the door. But, you may have to drill holes prior to drilling and then chisel a bit of the wood to ensure it's snugly fitted. If this is the case, you must be careful not to chisel too deeply or you could ruin the strength of your doorjamb.

You can also consider installing a new box strike plate that provides the lock with a stronger grip on the door and requires more force to open it. Typically, it requires two longer screws that secure the strike plate to the frame of the door. You'll need remove the previous strike plate and then drill and chisel the wood to make room for the new one.

This hard-to find strike plate is made of solid brass and has a heavy-duty thickness. It's specifically designed to be used with antique rim locks. This kit comes with wood screws and machine screws so you can select the appropriate hardware for your requirements. Keep in mind that wood screws have a pointed tip, and machine screws have a blunter tip.